TER-3D
Description
TER-3D | Thermostat
- Single thermostat for temperature monitoring and regulation in the range -30°C to +70°C (-22°F to 158°F) in six ranges.
- It can be used for monitoring temperature e.g. in switchboards, heating systems, cooling systems, liquids, radiators, motors, devices, open spaces, etc.
- The function of short-circuit or sensor disconnection monitoring.
- Possibility to set function “heating”/”cooling” (setting is done by DIP switch).
- Adjustable hysteresis (sensitivity), switching by a potentiometer in range 0.5 to 5°C / 0.9 to 9°F
- Choice of external temperature sensors with double insulation in standard lengths 3, 6 and 12m (9.8´,19.7´ and 39.4´).
- It is possible to place the sensor directly on the terminal block - for temperature monitoring in a switchboard or in its surroundings.
- Multivoltage supply AC/DC 24 -240V, not galvanically separated.
- Output contact 1x NO - SPST 16A /250V AC1.
- Red LED indicates the status of output, a green LED indicates the energization of the device.
- 1-MODULE, DIN rail mounting
More information
- Function: single level
- Supply terminals: A1-A2
- Voltage range: AC/DC 24 - 240V (galvanically unseparated) (AC 50-60Hz)
- Burden: 2VA
- Operating range: - 15%; + 10%
- Temperature range: 0°C to 60°C
- Number of contacts: 1x switch (AgSnO2)
- Operating position: any
- Mounting: DIN rail EN 60715
- Protection degree: IP40 from front panel / IP10 terminals
- Dimensions: 90 x 17.6 x 64mm
- Weight: 73g
Documents
Parameters
Power voltage | 24 - 240 V AC/DC |
---|---|
Design | 1-MODULE |
Sensor | External |
Temperature range | 0 ... 60 °C |
Related products (2)