simple thermostat for monitoring and regulating the temperature
It can be used for monitoring temperature e.g. in switchboards, heating systems, cooling systems, liquids, radiators, motors, devices, open spaces, etc.
The function of short-circuit or sensor disconnection monitoring.
Possibility to set function “heating”/”cooling” (setting is done by DIP switch).
Adjustable hysteresis (sensitivity), switching by a potentiometer in range 0.5 to 5°C / 0.9 to 9°F
Choice of external temperature sensors with double insulation in standard lengths 3, 6 and 12m (9.8´,19.7´ and 39.4´).
It is possible to place a sensor directly on the terminal block - for temperature monitoring in a switchboard or in its surroundings.
Multivoltage supply AC/DC 24 -240V, not galvanically separated.
Output contact 1x NO - SPST 16A /250V AC1.
Red LED indicates the status of output, a green LED indicates the energization of the device.
1-MODULE, DIN rail mounting
More information
Function: single level
Supply terminals: A1-A2
Voltage range: AC/DC 24 - 240V (galvanically unseparated) (AC 50-60Hz)
Burden: 2VA
Operating range: - 15%; + 10%
Temperature range: -30°C to 10°C (-22°F to 50°F)
Number of contacts: 1x switch (AgSnO2)
Operating position: any
Mounting: DIN rail EN 60715
Protection degree: IP40 from front panel / IP10 terminals
