RFSOU-1 | Twilight switch

• The wireless twilight dimmer measures the light intensity and based on a set value, it sends the command to switch on the lights or pull the blinds up or down.
• It can be combined with multifunctional switching units and blind switches.
• Integrated sensor for measuring illumination, settable in 3 ranges 1-100,000 lx.
• Selection of function:
  • twilight switch – automatically switches on upon a decrease in ambient light intensity, switches off upon an increase (appropriate for garden lights, advertisements, public lighting, etc.). 
  • light switch – automatically switches on upon an increase in ambient light intensity, switches off upon a decrease (appropriate for offices, restaurants, rooms, etc.).
• Settable delay up to 2 minutes to eliminate unwanted switching caused by surrounding influences.
• The twilight switch may control up to 32 units in the installation.
• The programming button on the regulator is used for:
• • setting a function with a switching or blind unit
  • ascertaining battery status
  • ascertaining signal quality between the unit and dimmer.
• Battery power (1.5V / 2 x AAA - included in supply) with a battery life of around 2 years based on the number of controlled units.
• Range up to 160m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO² that supports this feature.
• Communication frequency with bidirectional protocol iNELS RF Control.
• Increased IP65 protection is suitable for wall and outdoor installation.

Technical parameters

• Power supply: 2 x 1.5 battery AAA
• Battery life: approx. 2 years (according to the number of controlled units)
• Function setting: rotary switch
• Sending RF communication packet: 866 MHz, 868 MHz, 916 MHz
• Range in free space: up to 160m
• Working temperature: -20 to +50°C*
• Operating position: sensor side down
• Protection: IP65
• Dimensions: 72 x 62 x 34mm
• Weight: 104g