Monitor areas (e.g. bathrooms, basements, shafts or tanks) to provide flood warnings.
Upon detecting water, the flood detector immediately sends a signal to the switched unit, which further switches on a pump, GSM gate (link to RFGSM-220M), or closes a pipe valve. (Link to the valve in accessories).
The option of connecting an external probe FP-1 (not included in supply - max. wire length 30m.
The programming button on the detector is used to:
setting the function with switching unit
ascertaining battery status
ascertaining signal quality between the unit and detector.
Battery power supply (1.5V / CR2477 - included in the supply) with a battery life of around 1 year based on the frequency of use.
The detector can be placed anywhere thanks to battery power.
Range up to 160 m (in open space); if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
Communication frequency with bidirectional protocol iNELS RF Control.
Possibility of connecting an external probe FP-1 -max. cable length up to 30m.
Technical parameters
Supply voltage: 1 x 3V battery CR 2477
Indications / transfer function: red LED
Reset after flooding: JUMPER - Manual / Automatic
Frequency: 866MHz, 868MHz, 916MHz
Signal transmission method: bidirectional addressed message
