RFSC-61N - Socket design: _French
Description
RFSC-61N | Switched socket
- The switched socket is used to control fans, lamps, direct heaters, and appliances, which are connected by a power cord with a plug up to 16 A.
- They can be combined with detectors, controllers, or iNELS RF Control system components.
- Multifunctional design - button, impulse relay, and time functions of a delayed start or return with time setting 2 s - 60 min.
- The switched socket can be controlled by up to 32 channels.
- The programming button on the socket also serves as a manual output control with indication.
- Possibility to set the output status memory in case of failure and subsequent power recovery.
- Range up to 200 m (outdoors) (in case of insufficient signal between the controller and the device, use the RFRP-20 signal repeater) or components with the RFIO2 protocol that support this function.
- Communication with bidirectional RFIO2 protocol.
- Thanks to the socket design, installation is simple and straightforward by plugging it into an existing socket.
- The contact material of the AgSnO2 relay enables the switching of light ballasts.
- Produced in 3 designs of sockets/plugs
- French
- Schuko
- British
More information
- Supply voltage: 230 V AC / 50-60 Hz
- Communication protocol: bidirectional RFIO2
- Frequency: 866-922 MHz
- Range: in open space up to 200 m
- Protection: IP30
- Dimensions: 63 x 110 x 74 mm
- Weight: 129
Documents
Parameters
External buttons | NO |
---|---|
Functions | Multifunction |
Power voltage | 120 V AC, 230 V AC |
Design | Socket |
Output contact | 1 x switching 16 A |