6 functions: button ON/OFF, impulse relay, delay ON, delay OFF, output contacts: 2x NO 8A
Each channel can be individually programmed independently with 6 functions
The switch unit with 2 output contacts 8A is used to control two independent appliances.
They can be combined with detectors, controllers or iNELS RF Control system elements.
Functions: pushbutton, impulse relay and time functions of delayed start and return with time setting 2s-60 min. Any function can be assigned to each output relay. See page 70 for a description of features.
Each of the outputs can be controlled by up to 12 channels (1 channel represents one button on the controller).
The programming button on the element also serves as a manual output control.
Possibility to set the memory status in case of power failure.
Range up to 100m (outdoors), in case of the insufficient signal between the controller and the element, use the RFRP-20 signal repeater or elements with the RFIO2 protocol that supports this function.
Communication with bidirectional RFIO2 protocol.
The BOX version offers installation directly into the installation box, ceiling or cover of the controlled appliance.
