RFJA-32B | Switch unit for blinds (gates, garage doors, awnings ...) 

• Switch unit for blinds with 2 outputs is used to control garage doors, gates, blinds, awnings…
• They can be combined with iNELS RF Control controllers or system elements.
• RFJA-32B / 230V (120V): relay contacts 2x 8A (2x 2000W), with the possibility of connecting external buttons. The relays block each other (only one direction of movement at a time).
• RFJA-32B / 24VDC: contactless (noiseless) switching with the possibility of connecting external buttons. The drive is controlled by changing the polarity.
• Short presses (<2s) of the control allow the slats to be tilted, long presses (> 2) to extend/retract the blinds to the end position.
• Each element can be controlled by up to 25 channels (1 channel represents one assigned controller).
• The programming button on the element also serves as a manual output control.
• Range up to 100m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO² that supports this feature.
• Communication frequency with bidirectional RFIO2 protocol.
• The BOX version offers mounting directly in the installation box, ceiling or motor drive cover.

Technical parameters

• Supply voltage: 230V AC / 50 - 60Hz
• RF, by a command from transmitter: 866MHz, 868MHz, 916MHz
• Range in free space: up to 100m
• Operating position: any
• Mounting: free at lead-in wires
• Protection: IP30
• Dimensions: 49 x 49 x 21mm
• Weight: 46g