RFIM-40B: the wireless contact converter changes your existing button to a wireless one. - four inputs enable control of four units independently. - battery power supply (2x 3V / CR2032) with a battery life of around 5 years based on the frequency of use (included in the supply). - only impulse control
It can be used to transmit information on switching on the contact (detector, button, technology, logic output).
The BOX design lets you mount it right in an installation box under the button or switch.
When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down).
Sending a command is indicated by a red LED.
The option of setting light scenes, where with a single press, you can control multiple units of iNELS RF Control.
Range up to 200m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2that supports this feature.
Communication frequency with bidirectional protocol iNELS RF Control