RFIM-20B
RFIM-20B
Wireless input contacts converter - 2x permanent contacts
Description
RFIM-20B | Wireless contact converter
- RFIM-20B: the contact converter changes your existing button/switch to a wireless one.
- two inputs enable control of two units independent. - battery power supply (3V / CR2477
- included in the supply) with a battery life of around 5 years based on the frequency of use.
- contact can be permanently closed (does not drain on the battery) - It can be used to transmit information on switching on the contact (detector, button, technology, logic output).
- The BOX design lets you mount it right in an installation box under the button or switch.
- When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down).
- Sending a command is indicated by a red LED.
- The option of setting light scenes, where with a single press, you can control multiple units of iNELS RF Control.
- Range up to 200m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
- Communication frequency with bidirectional protocol iNELS RF Control.
Technical parameters
- Supply voltage: 1x 3V battery CR 2477
- Transmission indication / function: orange LED
- Number of inputs: 2
- Frequency: 866–922MHz
- Mounting: loose on supply wires
- Protection: IP30
- Dimensions: 49 x 49 x 13mm
- Weight: 45g
Related products (2)