RFDEL-71M /230V
RFDEL-71M /230V
Universal dimmer - MULTI function
6 lighting functions + ON/OFF functions Sources: R, L, C, dimmable LED, ESL. Output: 600W. External control via aux inputs by: analog signal 0(1)-10V, potentiometer or wired button.
3D MODEL
Manufacturer: ELKO EP
Ord. code: 4897 standard
EAN: 8595188148979
Original price £ 140
-30%
Price excl. VAT £ 98,00
Your price:
£ 117.60
incl. VAT
Description
RFDEL-71M | Universal dimmer
- The universal modular dimmer is used to regulate light sources:
- R – classic lamps
- L – halogen lamps with wound transformer
- C – halogen lamps with electronic transformer
- ESL – dimmable energy-efficient fluorescent lamps
- LED – LED light sources (230V).
- Control can be performed by: a) Detectors, Controllers and System units iNELS RF Control b) by control signal 0(1)-10V c) potentiometer d) existing button in the installation.
- The unit‘s three-module design with switchboard mounting enables the connection of a dimmed load of up to 600W.
- 6 light functions - smooth increase or decrease with time setting 2s-30 min.
- When switched off, the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
- Thanks for setting the min. brightness by a potentiometer, you will eliminate the flashing of the LED and ESL light sources.
- The universal dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
- The programming button on the controller is also used for manual control of the output.
- The package includes an internal antenna AN-I, in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
- Memory status can be pre-set in the event of a power failure.
- For components, it is possible to set the repeater function via the RFAF / USB service device.
- Range up to 160m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
- Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2 ).
Technical parameters
- Supply voltage: 230V AC / 50Hz
- Dimmed load: R,L,C, LED, ESL
- RF command from the transmitter: 866MHz, 868MHz, 916MHz
- Range in open space: up to 160m
- Analog control: potentiometer or 0 (1) -10V
- Mounting: DIN rail EN 60715
- Protection: IP 20 under normal conditions
- Dimensions: 90 x 52 x 65mm
- Weight: 125g