The sensor can be mounted in a panel (via a screw-on transparent cover) in a hole with a diameter of 16 mm. The sensor includes a plastic holder that can be used to place the sensor on a wall or other surface. The length of the supply cable to the sensor must not exceed 50 m. A two-core cable with a cross-section of min. 2x 0.35 mm2 and max. 2x 2.5 mm2.
The protection of the sensor is IP44. Conditions for compliance with this coverage:
the photoresistor cover must be sealed with a rubber ring (part of the sensor).
the cable must be circular in cross-section.
the cut-out of the grommet must be sufficiently tight for the cable used.
A photoresistor is used as a sensor, which changes its resistance depending on the ambient lighting. Resistance tolerance ± 33%.
The photosensor cannot be used alone.
Working temperature: -20 .. +55 ° C
Protection: IP 44
Length of connecting wire to the sensor: max. 50 m (ordinary wire)